You are here: 7.0 Energy > Ene 08 Energy efficient equipment

Ene 08 Energy efficient equipment

(all buildings)

Number of credits available	Minimum standards
2	No

Aim

To recognise and encourage procurement of energy efficient equipment to ensure optimum performance and energy savings in operation.

Assessment criteria

The following is required to demonstrate compliance:

Two credits

Identify the building's Equipment energy and estimate its contribution to the total annual equipment energy consumption of the building, assuming a typical or standard specification.

Identify the systems or processes that use a significant proportion of the total annual equipment energy consumption of the development and its operation.

Demonstrate a meaningful reduction in the total annual equipment energy consumption of the building. See Table 29

Table 29 contains solutions deemed to satisfy compliance for common examples of significant contributors to equipment energy consumption, for a number of different building types or functions.

Checklists and tables

Table 29: Examples of solutions deemed to comply with the criteria for the reduction of equipment energy load from significantly contributing systems

Ref	Function or equipment	Criteria
A	Small power, plug-in equipment	The following equipment meets the criteria for, or has been awarded with, a rating from a national or international energy efficient equipment scheme: Office equipment Other small powered equipment Supplementary electric heating. For domestic-scale white goods, the criteria in Ref F apply.
B	Swimming pool	Where automatic or semi-automatic pool covers, or 'liquid' pool covers with an automatic dosing system, are fitted to ALL pools, including spa pools and hot tubs (if relevant). The covers envelop the entire pool surface when fully extended. Where the air temperature in the pool hall can be controlled so that it is 1°C above the water temperature.
C	Communal laundry facilities with commercial-sized appliances	At least one of the following can be demonstrated for commercial-sized appliances: Specification of heat recovery from waste water Use of greywater for part of the washing process. This may be recycled from the final rinse and used for the next pre-wash.
D	Data centre	The design is in accordance with national or international best practice standards for energy efficiency in data centres or where no national standards exist, data centres are designed in accordance with the 'Best practices for the EUEurope Code of Conduct on Data Centres'1EU Code of Conduct on Data Centres: http://iet.jrc.ec.europa.eu/energyefficiency/sites/energyefficiency/files/best_practices_v4_0_5-r1.pdf principles with the data centre achieving at least the 'Expected minimum practice' level (as defined in the Code of Conduct). Temperature set points are not less than 24°C, as measured at the inlet of the equipment in the rack.
E	IT-intensive operating areas	Uses a natural ventilation and cooling strategy as standard, with forced ventilation only to be used when the internal temperature exceeds 20°C and active cooling only when the internal temperature exceeds 22°C. There is a mechanism to achieve automatic power down of equipment when not in use, including overnight.
F	Residential areas with domestic-scale appliances (individual and communal facilities)	Domestic-scale appliances have the following ratings (or better) under a national or international energy efficient white goods scheme equivalent to the EU Energy Efficiency Labelling Scheme, where provided: Fridges, fridge-freezers: A+ rating Washing machines: A++ rating Dishwashers: A+ rating Washer-dryers and tumble dryers: A rating Air conditioners: B rating OR If appliances will be purchased during occupation by the tenant or owner, information on the appropriate energy efficient white goods scheme must be provided to all residential areas of the building. Note: Any white goods available to purchase from the developer must be compliant with criteria F1 to F5 above. If criterion F6 was chosen to demonstrate compliance, only one of the two available credits could be awarded.
G	Kitchen and catering facilities	The project has incorporated at least two thirds of the energy efficiency measures outlined in the section summaries of each of the following sections of CIBSE Guide TM502CIBSE TM50: Energy Efficiency in Commercial Kitchens, CIBSE (except as specified): Section 8 (Drainage and kitchen waste removal) Section 9 (Energy controls - specifically controls relevant to appliances) Section 11 (Appliance specification - not fabrication or utensil specifications) Section 12 (Refrigeration) Section 13 (Warewashing: dishwashers and glasswashers) Section 14 (Cooking appliance selection) Section 15 (Water temperatures, taps, faucets and water saving controls). Refrigeration for kitchen and catering facilities should be assessed here, not in Ene 05 Energy efficient cold storage.
Energy efficient white goods scheme and equivalent rating scheme (Category reference F) Energy rating certifications other than the EU labelling scheme will be accepted, providing the energy efficiency performance is equivalent to the EU labelling scheme. This can be any internationally recognised energy efficiency labelling scheme for white goods or a national scheme developed for use in the country of assessment, for example Energy Label (in the EU), Energy Star (in the USA), The Appliance Energy Rating Scheme (in Australia), etc. A statement confirming that the scheme is nationally recognised and can be regarded as equivalent to the EU labelling scheme is required for use.

Compliance notes

Ref	Terms	Description
Shell and core (non-residential and residential institutions only)
CN1	Applicable assessment criteria	Both options: This issue is not applicable. Refer to Appendix D – Shell and core project assessments for a more detailed description of the shell and core assessment options.
Residential - Partially fitted and fully fitted
CN2	Applicable assessment criteria - Single dwellings	Partially fitted: This issue is not applicable. Fully fitted: All criteria relevant to the building type and function apply, subject to the notes within section F. Refer to Appendix E – Applicability of BREEAM New Construction to single and multiple dwellings, partially and fully fitted for a more detailed description of residential assessment options.
CN2.1	Applicable assessment criteria - Multiple dwellings	Partially fitted: This issue is not applicable. Fully fitted: All criteria relevant to the building type and function apply, subject to the notes within section F. Refer to Appendix E – Applicability of BREEAM New Construction to single and multiple dwellings, partially and fully fitted for a more detailed description of residential assessment options.
General
CN3	Refrigeration equipment	The criteria in Small power, plug-in equipment apply to the following refrigeration equipment (where present): Air-cooled condensing units Cellar cooling Commercial service cabinets Curtains or blinds for refrigerated display cabinets Refrigeration compressors Refrigeration system controls Refrigerated display cabinets.
CN3.1	A meaningful reduction in equipment energy demand	BREEAM does not specify a level or percentage that defines a meaningful reduction in equipment energy demand. The project team must justify how they have determined or judged a meaningful reduction from the equipment energy demand and the assessor must be satisfied that this is an appropriate justification.
CN3.2	Cold storage	The criteria do apply to commercial kitchen refrigeration, but not to other commercial or industrial-sized refrigeration and storage systems. These systems are covered within the scope of Ene 05 Energy efficient cold storage and should be removed from the list of Equipment energy loads with respect to this issue.
CN3.3	Lifts, escalators and moving walks	This issue does not apply to lifts, escalators and moving walks. These systems are covered within the scope of Ene 06 Energy efficient transport systems and should be removed from the list of equipment energy loads with respect to this issue.
CN3.4	Laboratory systems	This issue does not apply to laboratory ducted fume cupboards. These systems are covered within the scope of Ene 07 Energy efficient laboratory systems and should be removed from the list of equipment energy loads with respect to this issue.
CN3.5	Reuse of equipment	Reuse of electrical equipment does not comply by default, as it may not be the most energy efficient option. However, the credit could be awarded if the following criterion is demonstrated: Reusing the old equipment would, over the course of its life, be a more energy efficient option than specifying new equipment.

Methodology

Estimating annual equipment energy consumption

A method should be used that estimates actual energy use, based on expected equipment loads and hours of operation. The energy uses may be estimated by using simple hand calculations, benchmark data or by the methods described in CIBSE TM54: Evaluating operational energy performance of buildings at the design stage3TM54: Evaluating operational energy performance of buildings at the design stage. CIBSE. 2013.

Estimating a significant proportion of annual equipment energy consumption

This methodology is used to estimate which energy uses make up a significant proportion of the equipment energy uses and so detailed calculations are not required. The approach should focus on identifying the larger energy uses that should be included and the small energy uses that can be excluded. As a guide, energy uses making up at least 90% of the estimated total annual energy consumption should typically be included.

Evidence

Criteria	Interim design stage	Final post-construction stage
All	The following where appropriate: The relevant section or clauses of the building specification or contract. Manufacturers' product details. Documentation confirming compliance with the relevant scheme or standard outlined in the criteria, e.g. details of compliance with the EU Code of Conduct on Data Centres. Design drawings or calculations.	The following where appropriate: BREEAM Assessor’s site inspection report and photographic evidence. Manufacturers' product details. Documentation confirming the installed equipment complies with the relevant scheme or standard outlined in the criteria.

Criteria

Interim design stage

Final post-construction stage

All

The following where appropriate:

The relevant section or clauses of the building specification or contract.
Manufacturers' product details.
Documentation confirming compliance with the relevant scheme or standard outlined in the criteria, e.g. details of compliance with the EU Code of Conduct on Data Centres.
Design drawings or calculations.

The following where appropriate:

BREEAM Assessor’s site inspection report and photographic evidence.
Manufacturers' product details.
Documentation confirming the installed equipment complies with the relevant scheme or standard outlined in the criteria.

Additional information

Relevant definitions

Data centre: For the purpose of this BREEAM issue, the term 'data centre' includes all buildings, facilities and rooms which contain enterprise servers, server communication equipment, cooling equipment and power equipment, and may provide some form of data service (e.g. large-scale mission critical facilities all the way down to small server rooms located in office buildings).; Equipment energy; Building energy consumption resulting from systems or processes within the building, other than Service energy. This may include energy consumption from systems integral to the building and its operation, e.g. lifts, escalators, refrigeration systems, ducted fume cupboards; or energy consumption from operational-related equipment, e.g. servers, printers, computers, mobile fume cupboards, cooking and other appliances.
IT-intensive areas: These include computer areas where more than one computer per 5m² is provided, e.g. training suites, design studios, libraries' IT areas and other areas with a high density of computing devices.
Office equipment: Computer monitors, desktop computers, scanners, photocopiers, printers, workstations etc.
White goods and small power equipment: Domestic appliances, for example washing machines, fridges, freezers, fridge-freezers, tumble dryers, washer-dryers, air movement fans or heaters, etc.

Other information

None.